Vacancy! Vacancy!!: Off-shore Jobs At Amaiden Energy Nigeria Limited..(2 Positions)

1. JOB TITTLE:  Well Equipment Inspector

DESCRIPTTION

Ensure that all Company owned Deepwater Wellbore Drilling and Subsea Completion Equipment is received into storage, tested, and/or mobilised in line with approved QA/QC procedures

Ensure that all tasks are performed within approved Company approved or mandated Health and Safety Guidelines

Ensure that Completion Subassemblies are made-up, tested, managed and stored in line with approved processes, procedures and relevant Company rules

Ensure that all materials and equipment required for deepwater well completion, within its purview and located in contractors base, are loaded out to the rig in a timely manner

Ensure that equipment returned from the rig are inspected and returned to stock in line with approved standard QA/QC procedures and industry best practices

Ensure appropriate documentation and certification provided by Contractor for all equipment to be stored or mobilized for company use, in line with best QA/QC practice, and Company procedures.

ACTIVITIES

Prepare operations programs for equipment preparation

Produce the technical and operational synthesis

Ensure follow-up of equipment preparation operations

Draw up operating procedures for workshop activities including QC procedures

Ensure cost follow-up

Conduct studies to improve performance

Conduct studies and projects for affiliates

Participate in technical evaluation of tenders for service and equipment contracts

Optimize activities of service providers and assess their performance

Ensure the respect of safety rules and frames of reference

Anticipate needs and organize supply

Propose technological innovations

Contribute to improving skills and know-how

Participate in R&D projects

Evaluate job holders

Prepare budgets

Participate in the training of job holders

Implement operating structures

OBSERVATIONS ON ACTIVITIES AND TASKS

In close liaison with Well Equipment Inspection Superintendent and DCD Engineering Teams

 Ensure Company and Contractor procedures are in place and fully updated prior to commencing any activity.

Ensure Contractor’s personnel are fully aware of the content / aim / requirement of the activity

Ensure Contractor’s tools, necessary for the works (thread gauges, pressure test equipment, bucking unit, drift, OD & ID caliper…), are in good working order and calibrated

Witness / monitor equipment and subassembly inspection & testing activities at Contractor’s facility (e.g. Halliburton, Baker, Schlumberger, Ciscon ,Weatherford, OAL …) on single items

Ensure that testing of equipment / subassemblies are performed in line with procedures that have been fully approved by the Engineering team.

Ensure that the equipment/subassembly storage and transportation conditions are in line with standard industry practices.

Ensure that Completion Equipment is tested and ready for load-out in line with rig superintendent look ahead.

Ensure all QC documentations are fully completely filled up and approved prior to equipment dispatch to the rig.

Ensure that all equipment / sub assemblies returned from the rig are received into storage in line with approved procedures and industry best practices

Confirm with Superintendent whether returned sub assemblies require breakout and if so the required process to be followed

Monitor and follow up all local fabrications, ensuring that the fabrication and subsequent testing are in line with industry standards and relevant Company rules.

Perform pre-mobilization inspection of equipment and tools (including radioactive sources and explosives)

Perform equipment / subassembly failure investigation as may be required

Conduct System Integration tests as required by heirarchy

Assist in the annual (or semi-annual) audit of all Drilling and Completion sub contractors

Provide required assistance to well intervention for equipment preparation and make-up

Report all anomalies and Non-conformances in the equipment / process / procedures to the Well inspection leader and maintain / update a non-conformance report register / database at all times.

Follow-up all raised non-conformances until closure

Ensure that required completion equipment / subassemblies are loaded out to the rig on time.

Stand in for the QA/QC superintendent, as required by Hierarchy

– Approval of QA/QC plan

– Approval of QA/QC procedures

– Operational decisions

Observations:

For subassemblies, specifically, failure to follow approved procedures and industry best practices in the workshop may lead to significant Non-Productive-Time (NPT) and possible loss of the well, in the case of major equipment / string failure downhole.

JOB DIMENSION

Knowledge of deepwater drilling and completion equipment (including subsea XT systems), subassembly make-up procedures, relevant Company rules (completion screens, completion equipment testing etc) and associated QA/QC

Job Requirement

Initial formal education: Higher National Diploma  HND / or its Equivalent

Professional experience (number of years): 7 years minimum

Other (prior experience desirable): Offshore Completion Supervisor, Completion Equipment QA/QC Inspector, prior demonstrable experience with Halliburton and/or Schlumberger subsea completion equipment will be an advantage.

Click: APPLY NOW

2. JOB TITTLE: Olt Electrical & Instrumentation Supervisor

Job Description:

Follow up and supervise the electrical and instrumentation works at the Worksite to ensure compliance with applicable design specification, drawings and contract requirements,

Liaise with OLT System Leader on any electrical and instrumentation engineering issues for resolution or clarification of contract / design requirements and specification as may be required.

Review and comment as required on project documents: Method Statements, Work Procedure and any other Contractor /Subcontractor deliverables in due time as may be required,

Review and analyse work planning and schedule updates for the discipline’s project activities, in coordination with the COMPANY Project Control team, in order to ensure effective work planning, optimise and avoid clashes in work sequences,

Monitor the expected versus achieved works progress, focusing on potentials for delay and adequacy of resources; and to proactively highlight schedule issues, and promptly propose resolutions, in order to avoid blocking points on the works.

Follow up to ensure that site modifications are requested, approved, implemented and properly documented for as-built in accordance with approved project procedures,

Performance surveillance on electrical and instrumentation works at the Worksite, ensuring that Non Conformance Reports (NCR) is issued for any observed non conformance and follow up for NCR timely closure.

Participate as required at inspection and Factory Acceptance Tests (FATs) on behalf of Company,

Ensure that clarifications, derogations / exemptions and technical queries regarding electrical and instrumentation design of the buoy are properly treated in line with Company specifications and procedure, providing timely responses to the contractor/subcontractor and vendors,

Be proactive in reporting and highlighting areas of concern in the discipline and making recommendations on corrective actions,

Participate in project meetings at the Worksite.

Follow up field engineering and ensure red mark-up of detailed engineering documents for as-built dossiers realisation accordingly,

Follow up and supervise execution of tests, pre-commissioning and commissioning activities related to Electrical and Instrumentation Systems for the OLT Buoy,

Perform other works as may be assigned by Construction Superintendent at the Worksite or by OLT System Leader in the discipline.

Ensure detailed activities and progress reporting by issuing regular reports, any specific project reports, presentations, etc, as applicable or required for the works to hierarchy.

HSE Experience:

To ensure that an effective implementation of HSEQ requirements is applied, as appropriate at Worksite.

To take time for checking safety documents and permits at Worksite.

To ensure that risk assessment prior to starting of a new activity is properly conducted and understood by personnel involved.

To make himself visible at Worksite and available/approachable for discussion about HSE concerns.

To demonstrate evidence of his relationship to safety with clear communication on site about commitment to safety.

To continuously assess safety behaviour of personnel and intervene with a pro-active approach explaining and coaching.

To take every opportunity at site to communicate with workforce about safety, listening on difficulties, sharing his own experience and proposing applicable solutions.

To be involved in incident investigation and follow-up actions implementation.

Participate at safety tours, visits, tool box talks, JSA, etc, at the Worksite as required or necessary

ACCOUNTABILITIES

Directly responsible for supervision and follow up of execution of the project’s Electrical and Instrumentation scope of works at the Worksite, ensuring effective work planning and successful scope completion within schedule, including precommissioning / commissioning activities as applicable.

With full compliance to HSEQ requirements and best practice, the job holder is accountable for ensuring that CONTRACTOR / SUBCONTRACTOR carry out the works in accordance with COMPANY General Specification, project requirements, specified acceptance criteria and quality according to the Contract.

Report to the OLT Construction Superintendent on all project Electrical and Instrumentation works execution at the Worksite.

QUALIFICATIONS / EXPERIENCE REQUIRED

Graduate Bachelors Degree holder (BSc or BEng), or equivalent, in Electrical and Instrumentation Engineering.

Minimum of 7 years working experience in the Oil and Gas industry, with good experience in engineering designs and execution at construction phase.

Good knowledge of applicable codes, standards and regulations for electrical and instrumentation engineering and construction.

Good knowledge and previous experience of General Specifications will be added advantage.

Administrative skills including proficiency in typical office applications (Words, Excel, PowerPoint, etc)

Fluent in English and ability to communicate well at all levels within the Company. In addition, the candidate must possess very good planning, presentation, organizational and interpersonal skills.

Geographical mobility is required.

Click: APPLY NOW